Elevated Channel
BCM elevated channel is supplied in 3m lengths with internal channel dimensions of 160mm wide x 135mm deep. It comes complete with 3m lid which can be held in place with an interlocking H piece or locking bracket . The system is very easily handled and installed as a three metre length complete with lid weighs only 38kg. Elevated channel is complemented by a full range of accessories:
- Channel Bends - two 45 degree bends combine to produce a full 90 degree angle.
- ‘T’ Piece - simple, effective and easily installed the T Piece comes with a one piece lid.
- Joint Box - BCM’s joint box has been developed to enable a joint to be made without interference to the cable.
PRODUCT CODES |
BCM Part No. |
Rail Industry Cat. No. |
Product |
Length |
BCM C/04/03 |
4/090770 |
elevated cable channel |
3 metres |
BCM C/04/04CL |
4/090771 |
elevated cable lid |
3 metres |
BCM C/04/05 |
4/090775 |
elevated channel bend |
1.5 metres |
BCM C/04/06CL |
4/090776 |
elevated channel bend lid |
1.5 metres |
BCM C/09/03 |
4/090782 |
T Piece for elevated channel |
1.6 metres |
BCM C/09/04CL |
4/090783 |
lid for elevated T Piece |
1.6 metres |
BCM C/09/01 |
4/090780 |
joint box for elevated channel |
1.9 metres |
BCM C/09/02CL |
4/090781 |
lid for elevated joint box |
1.9 metres |
Wall thickness nominal 10mm
All wrap over lids are 20mm wider than the chamber
|
![bcm grc limited [ click here to return to launch page ]](png/logosm.gif)
